Hiroyuki Ohshima is Professor Emeritus of the Tokyo University of Science, Japan. He received his B.S. (1968), M.S. (1970), and Ph.D. (1974) degrees in physics from the University of Tokyo. He spent his post-doc life at University of Melbourne (1981-1983), State University of New York at Buffalo (1983-1984), and University of Utah (1984-1985). He is the author of “Theory of Colloid and Interfacial Electric Phenomena” (Elsevier, 2006), “Biophysical Chemistry of Biointerfaces” (Wiley, 2010), and “Encyclopedia of Biocolloid and Biointerface Science” (Wiley, 2016), and over 350 book chapters and journal publications reflecting his research interests in colloid and interface science. He currently edits Colloid and Polymer Science (Springer). In 2016, Ohshima was awarded the 29th Khwarizmi International Award by the Iranian Research Organization for Science and Technology for his contribution to the theory of colloid and interfacial electric phenomena. In 2017, he was selected as one of Asia's top 100 scientists for 2017 (The Asian Scientist Magazine, June 2017). In 2022, he was awarded Fellow of Japan Oil Chemists' Society. On January 13, 2021, the layman's summary of Ohshima’s research article: Gel Electrophoresis of a Soft Particle (Adv. Colloid Interface Sci., 271, 101977, 2019) was published on the Atlas of Science website

Prof. Tetsu Yonezawa is a lecturer at Hokkaido University, specifically in the Department of Materials Science and Engineering. His research primarily focuses on the field of materials science and engineering, with a special interest in the development and characterization of nanoparticles and their applications in various technologies. He has contributed significantly to the field through numerous publications and research projects. His work includes the synthesis and application of metal nanoparticles, such as gold and silver, for use in areas like catalysis and imaging technologies. He has been involved in developing advanced materials for thermal energy storage and electrocatalysts for energy applications.

Dr. Khalid Muajsam Batoo is at present Associate Professor at King Abdullah Institute for Nanotechnology, King Saud University, Riyadh, Saudi Arabia since 2010. His international acclaims comprise of an academic excellence award from Dover publications New York, U.S.A., Junior Research fellowship Award from Inter University Accelerator Center, New Delhi, India 2007. Speakers award in NANO-15 held at KSR Institutes, Tirchendode, Tamil Nadu India. ICNA-III-2016 Award from South Valley University, Egypt. Young Faculty Award-2016 by Venus International Research Foudnation, India. Speakers award in Kingdom Plastic Summit 2017, Riyadh, Saudi Arabia, Outstanding Scientist in Nanotechnology Award by Venus International Foundation 2017, Chennia India. As principal investigator, he has in his credit a number of projects of international repute from the National Plan For Science and Technology and King Abdul Aziz City for Science and Technology, Kingdom of Saudi Arabia and Deamnship of Research group King Saud University, Sadi Arabia. He has authored number of research papers published in peer reviewed Journals of International commendation and conference papers. He has supervised a number of masters and graduate students. He is serving reviewer to number of scientific journals and also editor and associate editor to Innovations in Corrosion and Materials Science, Journal of advanced Physical Sciences, Journal of Boielectronics and Nanotechnology, Asian Journal of Materials Chemistry, Journal of Nanoscience and Nanotechnology, Advanced Scientific Research, Research journal of Nanoscience and Engineering, Journal of Nanoscience and Nanomedicine, BAOJ Nanotechnology, Global Journal of Nanomedicine, BGR Publications, Science and Engineering Applications. As an invited speaker he has delivered many talks on nanotechnology and its applications in various countries such as Egypt, UAE, Saudi Arabia, Hong Kong, USA, China, Turkey, Bangladesh, Greece, India, etc.

Prof. T. S. Chung is a Jade Mountain Chair professor at the Graduate Institute of Applied Science and Technology of NTUST, Taiwan. Before joining NTUST, he was a Provost’s Chair Professor at the ChBE department of NUS in 2011-2021. In 2005-2008, he worked as a Senior Consultant for Hyflux, led and built its membrane research team. He became a Fellow in the Academy of Engineering Singapore in 2012 and received the Underwood Medal from IChemE UK for exceptional research in separations and Singapore President’s Technology Award in 2015. He received Distinction Award in Water Reuse and Conservation from IDA in 2016. He was ranked as No. 6th in Chemical Engineering by “the top 2% scientists in the world” published by Stanford U. in 2022 and 2023. His H-index = H-index = 131 (Scopus) or 153 (Google Scholar) (My 26, 2024).

Charles Ghany, Associate Professor of Physics at Mississippi College (Tenured) Charles Ghany has a PhD degree in Applied Physics from Mississippi State University (MSU, 2016 Graduate). He is also a holder of two Master of Science degrees in Physics from Umea University (Sweden) and Mississippi State University (USA) respectively. His undergraduate degree was also in Physics with a minor in Computer Science from the University of Buea (Cameroon). He has done a lot of research with laser induced breakdown spectroscopy and chemiluminescence based combustion diagnostics. He has worked as an instructor of records, teaching General Physics II and Physics III (Physics courses for undergraduate students) at MSU. He lectured at MSU for some time all the way through summer 1, 2016. After this, he moved in the fall of 2016 to Mississippi College (MC), where he began his career initially, as a visiting Professor of Physics. He is currently an Associate Professor of Physics and tenured at MC.

Prof. Dr. Sabu Thomas is the Director of the School of Chemical Sciences and the Honorary Director of the Centre for Nanoscience and Nanotechnology at Mahatma Gandhi University, Priyadarshini Hills P.O., Kottayam, Kerala, India. He earned his Ph.D. from the Indian Institute of Technology (IIT), Kharagpur. He is an eminent researcher with an h-index of 149, having published 1,500 international papers that have collectively received 150,000 citations. He holds 15 patents and has authored or edited 150 books. In 2008, he was ranked 5th among the most productive researchers in India. In 2018, he received the Faculty Research Award from Careers360, recognizing him as the most cited researcher in India in the field of Material Science. He serves as a visiting professor at various esteemed universities in countries including France, Germany, Belgium, Slovenia, and Poland. In 2017, Prof. Thomas was honored with a Fulbright Fellowship. He is leads a dynamic research group comprising Ph.D. students, post-doctoral associates, visiting students, and project researchers. To date, approximately 80 Ph.D. students have graduated under his guidance and are now contributing to academia and industry worldwide. He has established numerous research collaborations across the globe, further solidifying his international reputation as a leading scientist.

Ms Nusrat Jahan is working at the American International University Bangladesh as an Associatet Professor. She is conducting her PhD research in Material Science and Nanotechnology. She completed her M.Sc and B.Sc from the University of Dhaka. She has almost 15+ Year of experience in the field of Science.

Albin Kaelin CEO epeaswitzerland gmbh, Author Albin Kaelin is the founder, owner and CEO of epeaswitzerland gmbh since its foundation in 2009 and has driven the development and implementation of the Cradle to Cradle® design concept in various areas of the company. As early as 1993, he initiated the development of the Climatex® product line, which produced the world's first Cradle to Cradle® products. Cradle to Cradle® design creates recyclable products by setting itself apart from conventional recycling and maintaining the quality of the raw materials over several product life cycles. All materials are considered nutrients and are used in defined cycles at the right time and in the right place. Awards: Honored with over 30 awards since 2022, including IE 100 Award- 2024 and 2025 Albin Kaelin - Most Innovative CEO of The Year testify to his leadership and innovative spirit. References: THE EUROPEAN Climate Change: “A book for the businesses of tomorrow”, Author: “From Rebel to Radical Innovator; Leading the Transformation through Ciruclarity” Albin Kaelin epeaswitzerland gmbh epeaswitzerland gmbh supports companies in various fields of activity in the development and implementation of the Cradle to Cradle® design concept. With an experienced, internationally oriented and interdisciplinary management team, Cradle to Cradle® projects are implemented worldwide in all industries. www.epeaswitzerland.com Cradle to Cradle® Design Innovations Cradle to Cradle® Design defines and develops cyclable products. As a differentiation from conventional recycling, the quality of the raw materials is maintained over several product life cycles and only “chemicals assessed as safe” are used. The production processes, use and cycling of the products are designed according to the model of maintaining the quality of the raw materials over several life cycles. This means: no waste, everything is also a nutrient. The right materials are used in defined cycles (metabolisms) at the right time and in the right place.

Will Update soon

Dr. Shuyuan Zhao is assistant professor of School of Astronautics at Harbin Institute of Technology (HIT), China. She was a visiting scholar of Department of Mechanical & Aerospace Engineering at University of California, San Diego from 2014 to 2015. She was then sponsored to work in Physikalisch-Technische Bundesanstalt, Germany from 2018 to 2019. Her research interests mainly focus on: Theoretically Modeling and Simulation of Thermal Management Systems of Spacecrafts; Synthesis and Military Application of Thermal Protection Materials; Inverse Reconstruction of Radiation Properties for Thermal Protection Materials; Multidisciplinary Analysis and Optimization of Aircraft Thermo-Structural Systems; Damage Analysis and Design of Composite Key Components for SpaceApplication; Sustainable Resources and Energy Technology and Management. Dr. Zhao’s long-term commitments are to innovation of frontier fundamental theory, generic key technology research and engineering demonstration application of key structure components in high-end aerospace equipments.

Harshit Kohli is based out of Raleigh, North Carolina USA. He holds the position of Senior Technical Account Manager at Amazon Web Services, bringing over 14 years of rich experience in IT infrastructure management and solution design. His career has been marked by a strong track record in enhancing cloud strategies specifically tailored for healthcare clients, implementing robust analytics solutions, and effectively managing workloads related to Artificial Intelligence. He has received recognition for his ability to train and mentor teams, drive business process improvements, and conduct thorough architecture reviews, all of which play a crucial role in ensuring client success in a competitive landscape. Currently, he is pursuing a Doctorate in Artificial Intelligence at the University of the Cumberlands in the USA, complementing his academic background that includes a Master of Science in Information Technology and a Bachelor of Technology in Electronics and Instrumentation from India. His extensive experience encompasses collaboration with numerous clients on various Analytics and Artificial Intelligence use cases, where he has consistently demonstrated exceptional efforts and achievements. Additionally, he had the honor of serving as a keynote speaker at several international conferences focused on Analytics, Computing, and Artificial Intelligence. His involvement extends to reviewing research papers for multiple conferences and chairing sessions to ensure their successful organization. Furthermore, he has acted as a judge for various hackathons and prestigious awards, including Globee and Business Intelligence. Overall, his expertise in Data Analytics and Artificial Intelligence not only enhances his professional capabilities but also deepens his understanding of the field.

Will update soon.

Will Update soon.

Dr. Hakan Ates, Professor, was born in Ankara in 1971. He has been working for Gazi University, Department Metallurgical and Materials Engineering. He is an international welding engineer (IWE), and international welding inspector (comprehensive level IWI-C). He was also vice manager of the Gazi KABTEM application and research center. He has memberships to TPMA (Turkish Powder Metallurgy Association) and KATED (Welding Technology Society). In 2014-2015, he performed his postdoctoral studies on Silicon nanoparticles and silicon nanowires at UIUC. He worked as a researcher and executive in different projects. He has many papers on powder metallurgy and welding engineering and processes, additive manufacturing, nanomaterials, and thin films and so on

Dr. Cheng Lin is dedicated to the research of shape memory polymer composites and 4D printed smart medical devices. She has published papers as first author in journals such as Advanced Functional Materials (IF=19)、Research (IF=11)、Advanced Healthcare Materials (IF=10)、Composites Part B: Engineering (IF=13.1) etc. Her research work has been reported by more than 20 media platforms, including Science and Technology Daily, Health News of the National Health Commission, and People's Daily. Science and Technology Daily commented: It has broad application prospects and is expected to become a potential replacement device for metal occlusion devices.

Dr. Revathy Sankaran is an accomplished academic specializing in Bioprocess Technology, with a Ph.D. in Chemical and Environmental Engineering from the University of Nottingham Malaysia (2018). She currently serves as an Assistant Professor and Head of Research at UCSI University and is a Fellow of the Higher Education Academy (FHEA), UK. Her research focuses on the valorization of agricultural and biological waste through green extraction and encapsulation methods, particularly using the Liquid Biphasic Flotation (LBF) system. Dr. Revathy has successfully extracted high-purity bioactive compounds such as enzymes and pigments from agro-industrial residues and is currently expanding her work into the stabilization of these compounds via microencapsulation for functional food and pharmaceutical applications. Dr. Revathy is passionate about driving innovation in sustainable food systems while mentoring future scientists in biotechnology and chemical engineering.

Dr. Mohamad Nurul Azman Bin Mohammad Taib obtained my Doctorate degree (PhD) from University of Malaya in 2021 focusing on nanocellulose and functionalized nanocellulose as an additive in nitrile butadiene rubber. Before that, he completed his MSc in 2015 and BSc in 2010 from Universiti Teknologi MARA Shah Alam in Bio-composite Technology specific in composite products. As for working experience, he is currently working as senior lecturer at University of Malaya. Before that, he was working with King Fahd University of Petroleum and Minerals (KFUPM) under Interdisciplinary Research Centre for Advanced Materials as a Post-Doctoral Research Fellow focus on research regarding nano paper and heat insulator from date palm waste to replace dependency on synthetic materials for almost 2 ½ years. He also had working experience as Post-Doctoral Fellow in School of Chemical Sciences, Universiti Sains Malaysia for almost one year prior to work with KFUPM. His research interest includes bio-composite products such as pulp and paper composite, nano composites and biopolymer materials as well bio-engineering products. He is actively involved in research and development (RnD) in the nanofiller composite material products such as for nanocellulose composite, nano lignin composite, polymer composite and bio-composite products. He also has a professional membership from Malaysia Board of Technologist (MBOT) to carry the title of Technologist (Ts.). He has experience hands-on training in using Universal Testing Machine (UTM), cone calorimetry, FTIR, Transmission electron microscopy (TEM), Field Emission Scanning Electron Microscopy (FESEM) and atomic force microscopy (AFM) and many more instruments that he used in his research works. He has proven to have a reasonably good publication track record.

Will Update soon

Dr. Samuel Maima has been practising medicine for 28 years. His area of specialities include neuroscience, stem cell science, molecular biochemistry, quantum energy medicine, regenerative medicine, natural medicine and nutritional medicine. Over the last 15 years he has done performance audits into the performance of allopathic medicine in the treatment of chronic medical diseases and conditions including the incurable. He designed and developed therapeutics for chronic medical diseases including the incurable by integrating and collating the different body of scientific and medical disciplines by combining frequency medicine, mitochondrial medicine, stem cell therapy, quantum energy medicine, plasma water/hydrogen therapy, electronation therapy, natural and nutritional medicine where there are conference of antioxidative, anti-inflammatory, anti-proliferative, anti-tumor, anti-metastatic and anti-angiogenetic effects. He is currently pursuing PhD in Quantum Energy Medicine and PhD in Integrative Medicine.

He earned a Bachelor's degree B.Sc. in Applied Chemistry in 1998 from Department of Chemistry, Faculty of Science, Jordan University of Science and Technology (JUST), Jordan. He obtained a master's degree M.Sc. in the Applied Chemistry/ Inorganic Chemistry in 2000 from Department of Chemistry, Faculty of Science, Jordan University of Science and Technology (JUST), Jordan. His research work focused organo-silicon polymeric materials under the direction of Prof. Isam Arafa. His thesis included the synthesis of chromium(III) containing organosilicon matrices as well as the chemical/ electrochemical reduction of chromium (III) sites to metallic chromium clusters. These materials were used as metallic coating in different approaches. Jordan University of Science and Technology JUST had funded the M.Sc project. In 2003, he obtained the Ph.D degree in the Inorganic Chemistry Department of Inorganic Chemistry, Institute of Chemistry, Technishe Universitate Chemnitz, Germany.

Will Update soon.

Will Update soon.

Will Update soon.

Will Update soon.